151 / 1264
11313
Three
MASTER PNEUMATIC PRODUCT RANGE
SEMI-PRECISION PRESSURE REGULATORS
Recommended on applications where “near-instrument quality” pressure control is required at a
relatively low cost. A large diaphragm area allows greater sensitivity and adjustment resolution than
available with standard miniature pressure regulators. A smaller valve seat results in greater precision
and less regulated pressure variation with variations in supply pressure.
Semi-precision regulators are available in the Miniature range.
AIR-LINE LUBRICATORS
Master Pneumatic manufacture both wickfeed and sightfeed lubricators. Each design has unique
operating principles, benefits and features. In a wickfeed lubricator, a porous bronze wick is saturated
with oil by capillary attraction. Oil is stripped off the wick by air flow in a constant oil-to-air ratio. The
design is essentially self-adjusting, however oil delivery can also be varied by manual adjustment.
Units will not shut off or clog, even with dirt and moisture in the reservoir.
In the sight feed lubricator, air flows through an automatic flow sensor, which creates a slight pressure
differential between the air passage and the oil reservoir. This causes oil to move up a riser tube,
through the adjustable metering valve and to drip into a transparent nylon sight feed dome. Sight
feed lubricators are easy to adjust, visibly show how much oil is being dispensed and can be filled
under pressure. The adjusting knob can be removed to make the lubricator “tamper-resistant”. All
working parts are in an easily replaceable cartridge. For precision lubrication, refer to the SERV-OIL
lubrication section.
Air-line lubricators are available in Miniature, Guardsman Modular, Guardsman II Modular, Vanguard
Modular, Vanguard High Capacity, 350 Modular and 380 Modular ranges.
RELIEF VALVES
Relief valves are set for a desired maximum system pressure and inserted in a tee downstream of
regulated pressure to prevent over pressurisation of the system beyond the relief valve setting.
If the pressure exceeds the relief valve setting, it will dump system air to atmosphere.
INTEGRAL FILTER / REGULATORS
These units have essentially the same performance characteristics and features of individual filters
and regulators but provide economy of size and a lower cost. They are particularly useful where
horizontal space is limited. Reliable, internal, automatic drains are available for all sizes and series.
Gauge and two regulator ports are standard. Self-relieving regulators are standard, non-relieving
models are optional.
Integral filter / regulators are available in Miniature, Guardsman Modular, Vanguard Modular, 350
Modular and 380 Modular ranges.
PRESSURE REGULATORS
Design parameters, that reflect a “blend” of performance characteristics to best meet the needs of
industry, are found in the many series of pressure regulators that Master Pneumatic offers. Air flow,
accuracy of pressure settings, variations in air flow and supply pressure, regulated pressure ranges,
response time, repeatability, sensitivity and relief capacity, physical size and cost were all major
considerations in their design. Pilot operated regulators are available for applications where hands on
is not possible or where there are safety issues.
Pressure regulators are available in Miniature, Guardsman Modular, Guardsman II Modular,
Vanguard Modular, Vanguard High Flow, 350 Modular and 380 Modular ranges.