615 / 1264
577
Eleven
EQUAL STRAIGHT CONNECTOR
PART NUMBER
TUBE OD
PRICE
JGPEM0410W
10 mm
£2.32
JGPEM0415W
15 mm
£1.73
JGPEM0422W
22 mm
£2.70
JGPEM0428W
28 mm
£6.84
Suitable for central heating systems
PE-COPPER COUPLER
PART NUMBER TUBE OD
TUBE OD
PRICE
JGJG601B
20 mm
15 mm
£7.43
JGJG603B
25 mm
15 mm
£11.12
JGJG602B
25 mm
22 mm
£8.89
Suitable for cold water only
STEM ELBOW
PART NUMBER TUBE OD
TUBE OD
PRICE
JGPEM221010
10 mm
10 mm
£3.55
JGPEM221515
15 mm
15 mm
£4.00
JGPEM222222
22 mm
22 mm
£6.07
Suitable for central heating systems
ADAPTOR
FEMALE
PART NUMBER TUBE OD
THREAD
PRICE
JGCM011514S
15 mm
1/2” BSP
£1.48
JGCM012216S
22 mm
3/4” BSP
£2.20
REDUCING STRAIGHT COUPLER
PART NUMBER TUBE OD
TUBE OD
PRICE
JGPEM201510
15 mm
10 mm
£4.04
JGPEM202215
22 mm
15 mm
£4.77
Suitable for central heating systems
EQUAL ELBOW
PART NUMBER
TUBE OD
PRICE
JGPEM0310W
10 mm
£2.85
JGPEM0315W
15 mm
£2.04
JGPEM0322W
22 mm
£3.26
JGPEM0328W
28 mm
£7.98
Suitable for central heating systems
STEM TEE
PART NUMBER TUBE OD TUBE OD TUBE OD PRICE
JGPEM532210
22 mm 22 mm 10 mm
£4.70
JGPEM532215
22 mm 22 mm 15 mm
£4.70
Suitable for central heating systems
TAP ADAPTOR
FEMALE
PART NUMBER TUBE OD
THREAD
PRICE
JGCM321014E
10 mm
1/2” BSP
£2.38
2140
2140
2140
2140
2140
2140
2140
2110
PLUMBING AND HEATING FITTINGS
BURST PRESSURE (FITTINGS)
With copper or plastic pipe at 20°C: Speedfit fittings used with copper or Speedfit Barrier Pipe will withstand pressures well in excess of normal service
conditions.
HIGH TEMPERATURE
Can withstand 114°C intermittently for short periods. The Speedfit System should not be used on an uncontrolled heat source.
MAXIMUM TORGUE FIGURES (BSP & BSPT)
Plastic threads are not generally as strong as brass threads. Customers should be aware of this when choosing products for their applications. Over tightening
of plastic threads will cause undue stress and eventual cracking and leakage. The maximum torque figures for BSP and BSPT threads used on Speedfit
plumbing products in mating threads conforming to relevant British or international threads standards.
It is recommended that all installations are checked prior to use to determine that a seal has been made.
STANDARDS
APPLICATIONS
• Mains fed and indirect cold water systems
• Vented and unvented hot water systems
• Vented and sealed central heating systems
IMPORTANT INFORMATION
DO NOT USE FOR Gas, fuel, oil or compressed air applications
WORKING TEMPERATURES AND PRESSURES
Application Usual Working
Temperature
Max. Working
Temperature
Max. Working
Pressure
Cold water (indirect
and direct main)
20°C
20°C
12 bar
Central heating
82°C 105°C, short term
Malfunction at 114°C 3 bar
Hot water (including
unvented cylinders)
65°C
95°C
6 bar
MAXIMUM TORQUE (BSP & BSPT)
Threads
Size
Maximum Torque
Plastic
1/2”
3.0 Nm
3/4”
4.0 Nm
Brass
1/2”
4.0 Nm
3/4”
5.0 Nm