600 / 1264
562
Eleven
WORKING PRESSURE
Temperature
+23°C
+70°C
12mm - 28mm OD 10 bar
7 bar
Working temperature
-20°C to +70°C for use with air
MATERIALS
Bodies
Acetal copolymer
O-Rings
Nitrile rubber
Collets
Acetal copolymer with stainless steel teeth
TUBE TOLERANCES
Size
12mm - 28mm OD
Tolerance
+0.05 mm to -0.10 mm OD
FOOD QUALITY
All fittings in the John Guest Section with this symbol are produced in
Food and Drug Administration (FDA) approved materials and are therefore
recommended for food quality applications.
FEATURES / BENEFITS
• Installation time reduced by at least 50%
• Lightweight, easy to handle
• Safe, secure, leakproof
• Easy to alter or extend a system
• No corrosion, reduced maintenance
TUBE TYPES
John Guest fittings are suitable for use with a wide range of plastic and
soft metal tubing including UPVC, ABS, Polyethylene, Nylon, Mild Steel
and Copper to the tolerances set out, to the right. Soft plastic tube, such
as nylon, is to have a minimum wall thickness of 1.5 mm. The tube should
also have a good quality surface and be damage free.
EASY TO USE PUSH-FIT SYSTEM FOR COMPRESSED AIR
The John Guest range of push-in fittings and pipe, provide the ideal connection from compressor receiver to air line service components, through to complete
ring main and take-off points. A compressed air system can be installed quickly and easily, compared with other installation methods; time savings of at least
50% are easily achievable.
There is no need to prepare threaded pipe or solvent, all the connections can be made with a simple push-in action. The system is then immediately ready for
use. Complex systems can be assembled much more rapidly than with traditional methods and because fittings are easy to disconnect, systems can be altered
or extended with much reduced production down-time. The fittings are produced in either a tough engineering plastic material or in brass, in sizes 12 mm to 28
mm. They are intended for use with John Guest Nylon pipe but can also be used with Copper or Aluminium pipe.
Speedfit
Speedfit
Speedfit
R
R
THE PUSH-FIT SOLUTION FOR PLUMBING &
HEATING SYSTEMS ARE ALSO AVAILABLE
COMPRESSED AIR TECHNICAL INFORMATION