1002 / 1264
964
Twenty
HFC FREE DUST REMOVER
• High pressure liquefied gas aerosol
• Gives a powerful blast of ‘gas’ for the easy removal of dust and other
loose contamination, from hard to reach places, with no residue
• Typical uses include electronics & PCBs, keyboards, control consoles
and optical devices
• Free from HFC gases, which are known to contribute to global warming
• Economical on use
• Reduces electrical faults due to contamination
• Improves cooling fan efficiency by removing dust
• Extremely flammable - de-energise all equipment prior to use and
control or eliminate static charge, do not use in enclosed areas and
ventilate area well prior to re-energising
HFC FREE DUST REMOVER
FLAMMABLE
PART NUMBER
SIZE
PRICE
AMB-32504-400ML
400 ml
£8.37
GRAPHITE RELEASE SPRAY
• High purity, dry, concentrated graphite lubricant and release agent
containing fine graphite particles in a thermoplastic binder.
• Adheres strongly to metal, plastics, glass and many other surfaces
which require a highly effective anti-friction coating.
PRIMARY APPLICATIONS
• Glass moulding - mould pre-treatment and release agent
• Glass moulding - (gob) flow improver
• Glass industry general use and guide lubricant
• Dry film industrial lubricant
• Static discharge coating
• Electrically conductive contact lubricant
GRAPHITE RELEASE SPRAY
DRY FILM AGENT
GLASS FORMING
PART NUMBER
SIZE
PRICE
AMB-32499-400ML
400 ml
£29.70
GRAPHITE LOCK LUBE
• Dry, graphite lubricant for long-lasting, smooth lock operation.
• Microscopic grains of graphite ensure good penetration and effective
anti-seize lubrication.
• Extends lock life, even in mildly corrosive environments
• Dry film does not attract dirt and grime
• Excellent water resistance
• Wide operating temperature range
• Works even when lock has mild corrosion
APPLICATIONS
• Safety padlocks
• Door locks
• Brass and stainless steel locks
• Padlocks exposed to the weather
• Hinges
GRAPHITE LOCK LUBE
DRY LOCK LUBRICANT
PART NUMBER
SIZE
PRICE
AMB-32510-15ML
15 ml aerosol
£2.61
COLD GALVANISING SPRAY
• Unique combination of zinc powders and resins, formulated to form a
high performance zinc-rich coating
• Actively fights rust and corrosion with its galvanic properties
• Ferrous metals are protected by the sacrificial action, even when
scratched or damaged
• Creates a water-insoluble zinc oxide film, which prevents rust and
corrosion
• Excellent touch-up for damaged galvanised surfaces
• Allows spot welding
• No chlorinated solvents, completely lead and chromate free
• Excellent corrosion resistance through cathodic protection even when
the coating is scratched or damaged
• Good mechanical resistance due to the excellent adhesion on metal
• NSN 8030-01-120-3553
• BSEN 1461 - 1999
• Can be over painted by most commonly used finishes
• For general use in all situations where clean and degreased metal
surfaces need to be protected against corrosion
COLD GALVANISING SPRAY
ZINC-RICH GALVANIC
PROTECTIVE COATING
PART NUMBER
SIZE
PRICE
AMB-30291-400ML
400 ml
£11.99
3020
3020
3020
3020
SPRAYS AND LUBRICANTS